Single Print Utility Knife

---

This is a neat utility knife model that you can print on your printer. It has been engineered to be printed as one print with support., and can function as a working box cutter.  For more details about this model take a look at this utility knife in our shop or check out the videos below. 

Model Becomes Unlocked After 30 Members 

This is a simple small vice that can be used to hold wood and plastic parts you are working on.  You will need a 8x8x8 inch 3D printer for this model. It has been engineered to be printed as one print with support touching the build plate. For more details about this model take a look at this  vice in our shop to see more pictures and details about this model.

Model Becomes Unlocked After 40 Members 

This is a simple small vice that can be used to hold wood and plastic parts you are working on.  You will need a 11x11x8 inch 3D printer for this model. It has been engineered to be printed as one print with support touching the build plate. 

Model Becomes Unlocked After 50 Members 

This is a simple small vice that can be used to hold wood and plastic parts you are working on.  You will need a 11x11x8 inch 3D printer for this model. It has been engineered to be printed as one print with support touching the build plate. 

Model Becomes Unlocked After 60 Members 

This is a  useful simple hand drill model that you can print on your printer. It has been engineered to be printed as one print with support touching the build plate, and can function as a working old style hand drill for wood and most plastics.  This model was made to work with standard 1/4 inch hex bit ends. 

Model Becomes Unlocked After 70 Members 

This is a  useful Hand Sander model that you can print on your printer. It has been engineered to be printed as one print with support touching the build plate, and can function as a working hand sander for drywall, wood and most plastics.  

Model Becomes Unlocked After 80 Members 

This 3/8" reversible ratchet has been engineered to be printed as one print with support. You only need to break loose three parts to make this ratchet work!   

Model Becomes Unlocked After 100 Members for 3 consecutive months

This amazing little ratchet has been engineered to be printed as one print with support. You only need to break loose four parts to make this ratchet work!   

Model Becomes Unlocked After 150 Members for 3 consecutive months

This amazing 1/2" ratchet has been engineered to be printed as one print with support. You only need to break loose four parts to make this ratchet work!  

Model Becomes Unlocked After 200 Members for 3 consecutive months